Printing techniques

Pad Printing

Pad printing is an indirect printing method that can be used on almost all surfaces and shapes. First, the design is placed onto a metal plate using a photographic process. The image is then transferred onto a pad. These pads can be made in various sizes, allowing them to print on different shapes.

Screen Printing

The artwork is applied to the item using a mesh screen with a light-sensitive coating. A film is placed on the mesh, allowing some areas to pass light while blocking others. The unexposed areas are washed out, enabling ink to pass through. The screen is then placed directly onto the item, and the ink is pressed through the open areas of the mesh.

Embroidery

With embroidery, the logo is sewn onto the item. This method is commonly used for textile products such as caps, bags, or t-shirts. The price of embroidery is usually determined by the number of stitches and the size of the logo. Before embroidering an item, an embroidery card must first be created.

Laser Engraving

With laser engraving, the logo is burned into the item. The color cannot be influenced, as it depends on the material of the item and the layers beneath its surface.

Rotary Screen Printing

Rotary screen printing uses the same technique as regular screen printing, but it allows for printing on round products such as pens.

Screen Print Transfer

With screen print transfer, the desired logo is first screen-printed onto paper, creating a transfer. The transfer is then cut to size and applied to the item.

Digital Transfer

The logo is digitally printed onto a piece of plastic with an adhesive backing using a plotter. It is then cut out and applied to the item using a heat press. This printing technique is only used for textiles.

Ceramic Transfer

This printing technique is the same as screen print transfer. First, the logo is printed onto paper and then applied to a ceramic item. However, unlike screen print transfer, the item is baked in an oven at temperatures above 700°C. During the baking process, the ink is absorbed into the ceramic surface.

Embossing

With embossing, a heated stamp is used to press the logo into the item, creating a raised relief effect. Embossing is only possible on leather products.

Doming

Doming is a combination printing technique that involves printing a logo onto a sticker and covering it with epoxy resin. The resin creates a transparent protective layer over the logo, preventing scratches and giving it a special 3D effect.

Digital Printing

Using an inkjet printer, the logo is printed directly onto the item. This technique is suitable for both flat and 3D items.

Digital Label

With a plotter, the logo is printed onto a sticker and simultaneously cut to size. The logo is always printed in full color, ensuring high visibility.